.
 
.

Dairy Fats and Related Products

.
Redna cena: 218,54 €
Predvideni rok dobave: 14-21 dni
.
.
Količina:  
.
Strošek dostave je enoten za celo Slovenijo in znaša 2,95 €, ne glede na količino in vrsto kupljenih izdelkov.

Številni izdelki imajo oznako "brezplačna dostava", kar pomeni, da v prmeru nakupa takšnega izdelka poštnine ne boste plačali. 

Več o dostavi
Emka.si omogoča naslednje načine plačila:
  • z gotovino ob prevzemu (velja le za fizične osebe),
  • s plačilno oziroma kreditno kartico (Mastercard, Visa, ActivaMaestro, Activa, Diners, American Express),
  • s storitvijo Moneta (Mobitel in Simobil)
  • Plačilo po predračunu (pravne osebe)
  • Račun z odlogom plačila (za javna podjetja)
Več o plačilih

Pri vsakem izdelku je naveden predviden rok dostave. Glede na to katere izdelke izberete, se vam pri oddaji naročila prikaže tudi končni predviden datum dobave vašega pakete.

Večino izdelkov dostavljamo iz lastne zaloge, zato so naši dobavni roki zelo kratki.

Ko vam bomo poslali paket boste o tem obveščeni tudi po emailu. V emailu bo navedena številka vašega paketa ter povezava do Pošte Slovenije, kjer boste lahko preverili natančen status dostave.

Več o dostavi

To je spletna cena
Shrani v seznam želja
.

.

Opis



Describes manufacturing methods for cream, butter and various types of low-fat spreads. This book offers examinations of relevant nutrition issues and analytical methods.

The latest in our successful "Dairy Science" series, this book details the state-of-the-art manufacturing methods for cream, butter and various types of low-fat spreads. Coverage of the manufacturing technologies is complemented by examinations of the relevant nutrition issues and analytical methods. The authors, who are all specialists in their fields in respect to these products, have been chosen from around the world.

Preface to Technical Series Preface Dedication Contributors 1 Milk Lipids - Composition, Origin and Properties (T. HUPPERTZ, A.L. KELLY AND P.F. FOX). 1.1 Introduction 1.2 Composition of milk lipids 1.2.1 Fatty acids 1.2.2 Triacylglycerols 1.2.3 Mono- and diacylglycerols and free fatty acids 1.2.4 Phospholipids 1.2.5 Minor constituents 1.3 Origin of milk lipids 1.3.1 Biosynthesis and origin of the fatty acids in milk lipids 1.3.2 De novo synthesis of fatty acids 1.3.3 Uptake of fatty acids from the blood 1.3.4 Desaturation of fatty acids 1.3.5 Synthesis of triacylglycerols 1.4 Factors affecting the composition of milk lipids 1.5 Intracellular origin of milk lipid globules and the milk lipid globule membrane 1.5.1 Secretion of milk lipid globules 1.5.2 The milk lipid globule membrane 1.5.3 Lipids of the milk lipid globule membrane 1.5.4 Proteins of the milk lipid globule membrane 1.5.5 Enzymes of the milk lipid globule membrane 1.6 Physicochemical stability of milk lipid globules 1.6.1 Size distribution of milk lipid globules 1.6.2 Colloidal stability of milk lipid globules 1.6.3 Creaming of milk lipid globules 1.6.4 Coalescence of milk lipid globules 1.6.5 Homogenisation and properties of homogenised milk lipid globules 1.6.6 Temperature-induced changes in milk lipid globules 1.7 Crystallisation and melting of milk triacylglycerols 1.8 Conclusions References 2 Milk Fat Nutrition (P.W. PARODI). 2.1 Introduction 2.2 Conjugated linoleic acid 2.2.1 Origin of rumenic acid 2.2.2 CLA nutrition 2.2.3 CLA as an anticancer agent 2.2.4 Rumenic acid and mammary tumour prevention 2.2.5 CLA, RA and colon tumour prevention 2.2.6 Rumenic acid and the prevention of atherosclerosis 2.2.7 Trans fatty acids and coronary heart disease 2.2.8 Rumenic acid and immunomodulation 2.2.9 Rumenic acid and type 2 diabetes mellitus 2.2.10 Rumenic acid as a growth factor 2.3 Sphingolipids 2.3.1 Sphingolipids in colon cancer prevention 2.3.2 Sphingomyelin and cholesterol absorption 2.3.3 Sphingomyelin and the immune system 2.3.4 Sphingolipids and intestinal diseases 2.4 Butyric acid 2.5 Branched chain fatty acids 2.6 Fat-soluble components 2.6.1 The vitamins 2.6.2 Cholesterol 2.6.3 Other interesting components 2.7 Further nutritional benefits 2.8 Perceived nutritional negatives for milk 2.8.1 Milk fat and coronary artery disease 2.8.2 Saturated fatty acids 2.8.3 Fat intake and cancer 2.8.4 Dietary fat and obesity 2.9 Conclusions References 3 Separation and Standardisation of the Fat Content (M. GUNSING, H.C. VAN DER HORST, D. ALLERSMA AND P. DE JONG). 3.1 Introduction 3.2 Overview of the history of milk fat separation 3.3 Physical models 3.4 Standardisation of the fat content of milk 3.5 Conclusion References 4 Cream and Related Products (M.A. SMIDDY, A.L. KELLY AND T. HUPPERTZ). 4.1 Introduction 4.2 Cream processing 4.2.1 Separation 4.2.2 Standardisation 4.2.3 Heat treatment 4.2.4 Homogenisation 4.2.5 Quality of cream 4.3 Whipping cream 4.3.1 Production of whipping cream 4.3.2 Whipping of the cream 4.3.3 Characterisation of whipped cream 4.3.4 Influence of processing conditions on whipping characteristics of cream 4.3.5 Compositional factors affecting whipped cream characteristics 4.3.6 Influence of stabilisers and emulsifiers on whipping characteristics of cream 4.4 Aerosol-whipped cream 4.4.1 Production of aerosol-whipped cream 4.4.2 Properties of aerosol-whipped cream 4.5 Cream liqueur 4.5.1 Composition of cream liqueur 4.5.2 Processing of cream liqueur 4.5.3 Shelf-life of cream liqueur 4.6 Cultured, fermented or sour cream 4.6.1 Background 4.6.2 Production of cultured, fermented or sour cream 4.7 Coffee cream 4.7.1 Processing of coffee cream 4.7.2 Properties of coffee cream 4.8 Other cream products 4.8.1 Frozen cream 4.8.2 Dried cream 4.9 Conclusion References 5 Butter (R.A. WILBEY). 5.1 Introduction 5.2 Cream preparation 5.2.1 Sweet cream 5.2.2 Ripened/fermented/cultured cream 5.2.3 Modifications of cream ageing 5.3 Batch churning 5.4 Continuous butter manufacture 5.4.1 Cream feed to buttermaker 5.4.2 Conversion to butter-grains 5.4.3 Working 5.4.4 Salting 5.5 Alternative processes for cultured butters 5.6 Alternative technologies for continuous buttermaking 5.6.1 Low-fat route 5.6.2 Shearing high-fat cream 5.7 Recombined butter 5.8 Reduced-fat butters 5.9 Spreadable butters 5.10 Packaging 5.11 Flavoured butters 5.12 Quality issues 5.13 Concluding comments References 6 Anhydrous Milk Fat Manufacture and Fractionation (D. ILLINGWORTH, G.R. PATIL AND A.Y. TAMIME). 6.1 Introduction 6.2 Definitions and properties 6.3 Production statistics 6.4 Anhydrous milk fat/butteroil manufacture processes 6.4.1 Principles 6.4.2 Manufacturing options 6.4.3 Quality of milk fat during and post manufacture 6.5 Milk fat fraction 6.5.1 Process options 6.5.2 Fraction properties 6.6 Ghee 6.6.1 Introduction 6.6.2 Methods of manufacture 6.6.3 Packaging 6.6.4 Chemical composition 6.6.5 Flavour 6.6.6 Physicochemical properties 6.6.7 Texture 6.6.8 Thermal oxidation 6.6.9 Shelf-life of the product 6.6.10 Nutritional aspects 6.6.11 Ghee as a medicine 6.7 Conclusion 6.8 Acknowledgements References 7 Production of Yellow Fats and Spreads (B.K. MORTENSEN). 7.1 Introduction 7.2 Legislations 7.3 Dairy fat spreads 7.3.1 Introduction 7.3.2 Production technologies 7.3.3 Quality aspects 7.4 Blends and blended spreads 7.4.1 Introduction 7.4.2 Production technologies 7.4.3 Quality aspects 7.5 Products with modified functionality 7.5.1 Introduction 7.5.2 Production technologies 7.5.3 Applications 7.6 Nutritionally modified products 7.6.1 Introduction 7.6.2 Production technologies 7.7 Conclusions References 8 Cream Cheese and Related Products (T.P. GUINEE AND M. HICKEY). 8.1 Introduction 8.2 Background and development 8.3 Definitions and standards of identity 8.3.1 Background and evolution 8.3.2 European legislation 8.3.3 UK legislation 8.3.4 Irish legislation 8.3.5 US legislation and standards 8.3.6 Canadian legislation and standards 8.3.7 German cheese legislation with particular reference to cream cheese-type products 8.3.8 Danish cheese legislation with particular reference to cream cheese-type products 8.3.9 French cheese legislation with reference to some cream cheese-type products 8.3.10 Italian standard on Mascarpone 8.3.11 Cheese legislation in Australia 8.3.12 Codex Alimentarius - international standards for cheese and cream cheese 8.4 Cream cheese 8.4.1 Principles of manufacture 8.4.2 Manufacture stages 8.4.3 Recombination technology 8.5 Basic characterisation of the structure and rheology of cream cheese 8.6 Factors affecting the properties of cream cheese 8.6.1 Homogenisation of cheese milk 8.6.2 Holding of hot curd at high temperature while shearing 8.6.3 Homogenisation of the heated cream cheese 8.6.4 Cooling rate 8.6.5 Addition of whey protein 8.6.6 Hydrocolloids 8.6.7 Composition 8.7 Related cheese varieties 8.7.1 Mascarpone 8.7.2 Neufchatel and Petit-Suisse 8.7.3 Kajmak 8.8 Conclusion References 9 Microbial Production of Bioactive Metabolites (S. MILLS, R.P. ROSS, G. FITZGERALD AND C. STANTON). 9.1 Introduction 9.2 Short-chain fatty acids 9.2.1 Background 9.2.2 Production of short-chain fatty acids in the colon 9.2.3 Role of short-chain fatty acids in health and disease 9.3 Gamma amino butyric acid 9.3.1 Introduction 9.3.2 Gamma amino butyric acid effects 9.4 Overall conclusion 9.5 Acknowledgements References 10 Trouble Shooting (B.B.C. WEDDING AND H.C. DEETH). 10.1 Introduction 10.2 Milk 10.2.1 Transmitted flavours 10.2.2 Chemical flavours 10.2.3 Flavours associated with oxidation 10.2.4 Flavours associated with heat treatment 10.2.5 Bacterial flavours 10.2.6 Lipolysed flavour 10.2.7 Proteolysis 10.2.8 Antibiotics 10.3 Cream 10.3.1 Transmitted flavours 10.3.2 Microbiological defects 10.3.3 Defects associated with oxidation 10.3.4 Physical defects and stability 10.3.5 Lipolysis 10.3.6 Defects associated with whipped cream 10.3.7 Defects associated with coffee cream 10.3.8 Defects associated with UHT cream 10.3.9 Defects associated with sterilised cream 10.4 Butter 10.4.1 Microbiological defects 10.4.2 Cultured butter 10.4.3 Butter churning defects 10.4.4 Oxidative defects 10.4.5 Physical defects 10.5 Dairy spreads 10.5.1 Fat phase structure 10.5.2 Microbiological defects 10.5.3 Oxidative defects 10.6 Cream cheese 10.6.1 Microbiological defects 10.6.2 Emulsion stability 10.6.3 Flavour defects 10.6.4 Texture defects 10.6.5 Oxidative defects 10.7 Conclusion References Index
.
.
Oglejte si ostale knjige tega avtorja
.
.
Oglejte si vse knjige tega avtorja
.

O avtorju - Adnan Y. Tamime

Obvestite me o novi knjigi tega avtorja

Želite, da vas po elektronski pošti obvestimo, ko izide nova knjiga ali ponatis katere od knjig tega avtorja?

DA - obveščajte me o novostih avtorja
.
.
.
.

Podrobnosti o izdelku

  • Obseg/št. strani: 344
  • Datum Izida:
  • Jezik: angleški
  • Vezava: Trda
  • ISBN/EAN: 9781405150903
  • Mere izdelka vxš: 25,1 x 18 cm
  • Založba Wiley and Sons Ltd
  • Avtor:
  • Povprečna ocena:
    Ocena kupcev: 0
    (0)

Mnenja kupcev

  0  ocen:
5 zvezdice
0%
(0)
4 zvezdice
0%
(0)
3 zvezdice
0%
(0)
2 zvezdice
0%
(0)
1 zvezdica
0%
(0)
Povprečna ocena kupcev:
Ocena kupcev: 0
(0 ocen uporabnikov )
.
Ocenite izdelek s klikom na zvezdice:
 
.
.
.
.
.

Oznake kupcev o tem izdelku

Kliknite na posamezno oznako za prikaz vseh izdelkov označenih s to oznako:

Dodaj oznako:

Dodaj
.